CNC flame cutting machine 1. Track daily maintenance personnel are not allowed to stand, treading, by ballast, but not allowed to strike, rail surface dust with compressed air after each class with gauze dipped 20 # oil wipe the track surface. Always keep track surface lubricated and clean. 2. drive rack with 20 # engine oil should be cleaned daily flame cutting machines, there are particles of spatter on the rack is not allowed. 3. The operator only allows demolition cutting nozzle buy flame cutting machines, and the rest can not disassemble parts, electrical junction box allows only relevant personnel overhaul, before being opened. 4. If the device fails, maintenance personnel should be treated promptly professional flame cutting machine, the larger failure, equipment should be reported to the officer at the joint hearing of the organization, to determine the maintenance program. Forbidden to disassemble inspection. What is a flame cutting it? Flame cutting is the oldest thermal cutting methods, the cut metal thickness from 1 mm to 1 m, but when the 20 mm below the majority of low carbon steel thickness you need to cut, you should use other cutting methods. Flame cutting is the use of high temperatures generated during combustion of the iron oxide to cutting carbon steel, the flame torch is designed to provide sufficient iron oxide combustion oxygen, in order to obtain good cutting results. Low cost and flame cutting equipment is cutting thick metal plate only cost-effective means, but its shortcomings in terms of sheet cutting. Compared with the plasma, flame cutting of the heat-affected zone to be much larger, relatively large thermal deformation. In order to cut accurately and effectively, require highly skilled operators in order to avoid thermal deformation of the metal plate in time during the cutting process. Flame cutting machine brand business | flame cutting machines Yu Hing production | flame cutting machine provided by the Zhengzhou-NC Jade Products Limited. Zhengzhou Yu-NC Products Ltd. (www.yuxingsk.cn) is Zhengzhou, EDM, wire cutting leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In Yu-NC leadership with the staff warmly welcome all inquiries negotiations to create jade-NC a better future.